![John Hagensieker](/img/default-banner.jpg)
- 384
- 574 492
John Hagensieker
Приєднався 15 лип 2006
Creality Falcon 2 Pro Engraving From An SD Card
It is easy to engrave from an SD card on the Creality Falcon 2 Pro.
This video augments a blog post at:
hagensieker.com
Creality Falcon 2 Pro Laser Engraver:
s.zbanx.com/r/o3iORhXn7Yc5
This video augments a blog post at:
hagensieker.com
Creality Falcon 2 Pro Laser Engraver:
s.zbanx.com/r/o3iORhXn7Yc5
Переглядів: 41
Відео
Astron SS-25M Marketplace Score and Refresh
Переглядів 3221 день тому
I picked up an Astron SS-25M for a song on Facebook Marketplace. Two new output terminal blocks and one LED switch later it is like brand new. The story here: hagensieker.com/2024/06/08/astron-ss-25m-power-supply-minor-repair/
Creality Falcon 2 Pro Laser Engraver Cutting Test
Переглядів 3421 день тому
Creality Falcon 2 Pro Laser Engraver Cutting Test This video augments a blog entry at: hagensieker.com Creality Falcon 2 Pro: www.crealityfalcon.com/products/creality-falcon-2-pro-enclosed-laser?variant=48610302296361
Creality Falcon 2 Pro Engraving Test
Переглядів 2021 день тому
This is a quick test of the Creality Falcon 2 Pro engraving capabilities. Additionally, I tested the repositional accuracy of the machine by making a 2nd pass after homing the machine. This video augments a blog entry at: hagensieker.com Creality Falcon 2 Pro: www.crealityfalcon.com/products/creality-falcon-2-pro-enclosed-laser?variant=48610302296361
Creality Falcon 2 Pro Laser Engraver Overview
Переглядів 3121 день тому
Creality provided me their Falcon 2 Pro Laser Engraver to review. This video augments a blog post at: hagensieker.com Creality Falcon 2 Pro Laser Engraver: s.zbanx.com/r/o3iORhXn7Yc5
Algolaser Alpha MK2 First Burn After Assembly
Переглядів 82Місяць тому
After assembling a laser I always video the initial test engraving. Good or bad, it gets published. This video augments my blog entry at: hagensieker.com/2024/06/01/algolaser-alpha-mk2-laser-engraver-review/ Algolaser algolaser.com/?sca_ref=4521883.bYk6fPUnsz& Algolaser Alpha MK2 algolaser.com/products/algolaser-alpha-mk2-diode-laser-engraver-algolaser?sca_ref=4521883.bYk6fPUnsz&
Algolaser Alpha MK2 Engraving From USB
Переглядів 67Місяць тому
How to laser engrave from a USB gcode file on the Algolaser Alpha MK2. This video augments my blog entry at: hagensieker.com/2024/06/01/algolaser-alpha-mk2-laser-engraver-review/ Algolaser algolaser.com/?sca_ref=4521883.bYk6fPUnsz& Algolaser Alpha MK2 algolaser.com/products/algolaser-alpha-mk2-diode-laser-engraver-algolaser?sca_ref=4521883.bYk6fPUnsz&
Makeblock mBot Ultimate 2.0 Beverage Robot
Переглядів 65Місяць тому
Tell me who doesn't need this in their life? Makeblock bit.ly/3UVRzYc Makeblock 10 in 1 ultimate robot kit. bit.ly/4aHPncl
Algolaser MK2 Homing Issue And Fix
Переглядів 190Місяць тому
On the first power up of the Algolaser Alpha MK2 the Y end stop microswitch was not hitting the stop causing some serious chattering. A minor adjustment to the switch fixed the issue. This video augments my blog entry at: hagensieker.com/2024/06/01/algolaser-alpha-mk2-laser-engraver-review/ Algolaser algolaser.com/?sca_ref=4521883.bYk6fPUnsz& Algolaser Alpha MK2 algolaser.com/products/algolaser...
ACMER P2 Cutting Test
Переглядів 80Місяць тому
This video augments a blog entry at hagensieker.com The ACMER P2 33 watt laser module absolutely sliced through 11 mm thick wood in a couple of passes. No burning. No charring. No gooey mess.
ACMER R10 Enclosure
Переглядів 40Місяць тому
This video augments a blog entry at hagensieker.com ACMER R10 Laser Engraver Enclosure. acmerlaser.com/products/acmer-laser-engraver-enclosure-box
ACMER P2 Familiarization and Testing
Переглядів 93Місяць тому
This video augments a blog entry at John's Tech Blog hagensieker.com First real world burn with the P2 and quick familiarization. ACMER P2 acmerlaser.com/products/acmer-p2-33w-laser-engraver-cutter-machine
ACMER P2 First Engraving Test
Переглядів 69Місяць тому
Every time I review a new laser I shoot some raw video of the first time I engrave something. If it fails, you'll see it. If it performs perfectly, you'll see that too. This is the 1st test of the ACMER P2, 33 watt laser. acmerlaser.com/products/acmer-p2-33w-laser-engraver-cutter-machine
AMCER M2 Rotary Roller Setup in Lightburn
Переглядів 4602 місяці тому
AMCER M2 Rotary Roller Setup in Lightburn
SharkRF Openspot 4 Pro Profile Switching
Переглядів 942 місяці тому
SharkRF Openspot 4 Pro Profile Switching
Retevis Ailunce HA1G CPS Buttons Missing For Scanlist
Переглядів 1112 місяці тому
Retevis Ailunce HA1G CPS Buttons Missing For Scanlist
Programming a Wouxun KG-Q10H with CHIRP Software
Переглядів 5662 місяці тому
Programming a Wouxun KG-Q10H with CHIRP Software
Repositional Accuracy Test - ACMER P1 S Pro
Переглядів 1373 місяці тому
Repositional Accuracy Test - ACMER P1 S Pro
First Test Burn of the ACMER P1 S Pro Laser
Переглядів 2623 місяці тому
First Test Burn of the ACMER P1 S Pro Laser
Power and SWR Test on Quansheng UV-K6
Переглядів 3963 місяці тому
Power and SWR Test on Quansheng UV-K6
I am having the same problem here with windows too. Anker 2.5 Gbe adapter with 2023 ROG G14, same thing happened when power plugged in. Is there solution to this problem?
I am having double lines on the Y-Axis with this test. What is the possible reason of this?
Loose belts, moving too fast, home shifting slightly, etc.
Dear John, Hello! We released a new product in 2024, can you please help us review it? !
What do you have in mind? You can contact me via my blog at hagensieker.com
Hi there, I'm having the same issue but unfortunately the fix only works for a short time and it fails the homing again, seems like the gantry loses it alignment after the laser head travels some distance along the y axis, I tried to tighten the v wheels screws of the y axis rails but that doesn't solve the issue. Can you please confirm if your issue is permanently fixed? Cheers
Go to my blog linked in the comments and I have a video linked to Algolaser showing how to align the front end to hit the stop correctly. Mine seems to be fixed permanently by what I showed in this video.
Like your Video Would have been helpful to see and know how well it worked for you
This Looks Like The Washer At Holston In Damascus Va
Does.the.fine.tuning.nobwork.any.good
Looks like you need to get a few honeycomb tables to review.
Thank you
Do you engrave befor you add finish to the board
I oil first and then oil again over the engraving when done.
Excellent demonstration! Thanks for sharing
What frequency does the clone feature use? Is it via Bluetooth or an RF Frequency? If it is via RF is it possible to change the default frequency if it is not legal to TX on that frequency in your country?
It's good one! I noticted that the ACMER is launching a new machine P3 is the perfect tool for anyone who wants to unleash their creativity. Can't wait to see!!
That’s noaa weather radio.
Great video! I've been using Audacity to capture audio like this for many years. For anyone reading this: This works with any radio source or scanner with a headphone or dedicated recording output. This program also works well to equalize audio levels and remove silence if you have previously recorded tracks with the silence recorded. You have a new subscriber, John; going to check out your other content now!
Thanks. Most of these videos augment some post I have on my Tech Blog. hagensieker.com
I'm trying to figure out how to add these gmrs channels without wiping the pre-installed ham files. If anyone has any tips on this I appreciate it.
So I got information how to do it if anyone needs it. It is also on Mel's chirp form posts.
Do they have a tentative release date for a supported version?
Good morning can u show me lightburn Rotary setup , mine doesn't rotate, thanks Dino
thx for this!
This 10-watt laser surprisingly has such great cutting ability. What kind of air assist did you use?
Speakers name ?
LS3/5A
Did you have any issues downloading the CPS for the HA1G. Ive spent hours trying to get it work and all i get is an error
No issues. Email them. They sent me another CPS and Codeplug which is improved.
What error?
Thank you 👍🙌
for some reason im not able to run my laser past 50% power hence unable to cut. whenever i do, the laser just flashes the blue light real bright and just freezes in the current position. wont go back to origin or anything. any ideas that could bet me on my way?
Very cool!
thank you so much for your sharing😀
thank you so much for your sharing😊
The ACMER machine looks very cool.
LoRa32 Encrypted Communications with Meshtastic Firmware i need code for this project on your channel pls help me
Not my code or my repository but here is the GitHub. github.com/meshtastic
@@hagensiekerj thanks
code please
Hey John, I'm first.. Ha Ha Ha, all kidding aside, I've had my Alpha for almost a week and let me tell you, I am THRILLED and AMAZED with the value and performance of this laser. I'm going through the "normal" learning curve and getting up to speed with the latest LightBurn Rev. 1.5.05 and have one burning - get it - question please. Do the servo motors digital encoders still report the laser head position even if the head is moved manually - by hand to the cutting/burning starting point when the machine is powered on? Your experienced reply will be welcome and appreciated by this newbie. P.S. My first "real" project was burning a laser crosshair mount that should be considered standard equipment and with calibrating the offset in LB, it is easy peasy setting your start point. Thank you again for your reply.... Hank
Thank you for showing me the sculpin S9. Others show different lasers and I didn’t know where to set my laser. I’m a beginner and needed some detailed direction. Cute dog!
I would be interested also if you make to sell these
Lol
Thanks a lot for your video, i've been looking for these kind of tutorials for so long!!
Is it possible you can make this and make a video on how to do it? ua-cam.com/video/QM6wm0A_Flg/v-deo.html
That little pc is just over $100 not quite a "$30 police scanner" for everyone else
Still a lot cheaper than a Uniden SDS100 or SDS200!
I run it on $30 ebay linux machines.
Awesome thank you for the directness of your video. It was very benificail to follow along while creating the jig. Again Thank you!
?? The whole video would be great?? Where can I find it at???
Fucked? Why laser that 😊😅😅😅
Thanks for the walk through, John!
I installed this but found that there was a steady water leak from both sides of the fittings. To be specific, even with teflon tape, both sides of the fittings are drip, drip, dripping on me. Any ideas?
Great video mate! I am currently waiting for my bb7, and also gonna replace my tektros.. Tho I’m running hydraulic on my cargo, I really prefer good old mechanics on a road bike. Seems to me Avid aren’t really putting themselves out there. So any videos surrounding them is greatly appreciated.
Did you add the switches on an extended frame
No. Stock frame.
ok one more question, do you think the cable is long enough for an extended frame? @@hagensiekerj
@@SChurchTWS Not for the one I installed. Get with Sculpfun. They probably make an extended set.
Thanks@@hagensiekerj
Getting frustrated an not understanding why when im hooking everything up the same way as i the video
Mine still jogs over an crashes into the side of rails an i had it all connected to the roller what am i doing wrong wanna get this thing figured out
Going too fast.
What settings did you use? Are you using Lightburn?
what about a traditional wall switch? Need a backup.
bro can you give something to communicate you i have some queries
can you provide code